Audi B8/8.5 4.0T Swap RH Engine Mount Bracket Kit

$899.99

Allows you to directly bolt up the 2013-2018 4.0T engine (EA824) to a B8/8.5 4.2L-equipped subframe. 2 spacers fill the gap between the motor mount and the subframe.

In stock and shipping immediately.

Allows you to directly bolt up the 2013-2018 4.0T engine (EA824) to a B8/8.5 4.2L-equipped subframe. 2 spacers fill the gap between the motor mount and the subframe.

In stock and shipping immediately.

  • For B8 cars with hydraulic steering, you do not need to get a different subframe. Any B8 subframe will work.

  • For B8.5 cars with electric steering, you will need a subframe from a B8.5 RS5 (8K0-399-315-H). The reason is that there are missing bolt holes on the B8 A4/S4/A5/S5 subframes needed to mount the V8.

Only use 3.0T engine mounts. We used 034’s billet motorsport engine mounts with our swap.

Make sure the subframe you purchase comes with the original engine mount heat shields shown in the photo below; they are needed for the swap. Part numbers underlined below have been verified by us and used in a swap. Others are part numbers we found using Audi parts diagrams; use at your own risk, and please let us know if you confirm they work.

For B8 subframe (hydraulic steering), the heat shield part numbers are:

  • Left - 8K0-399-059-B or 8K0-399-377-AE

  • Right - 8K0-399-060-B or 8K0-198-381-H (supersedes 8K0-399-378-AA)

For B8.5 subframe (electric steering), the subframe part number is 8K0-399-315-H. The heat shield part numbers are:

  • Left - 8K0-399-059-J (supersedes 8K0-399-377-AT)

  • Right - 8K0-399-060-J (supersedes 8K0-399-378-AJ)

 
 

You Might Also Like