3S Mitsubishi 3000GT/Dodge Stealth Driveshaft Center Support Bearing Carrier Upgrade (DSM05A0/3)

from $279.99

IN STOCK. SHIPS SAME-DAY IF ORDERED BEFORE 12PM CST M-F.

  • Reduces drivetrain slop

  • Restores and maintains driveshaft alignment

  • Installs without having to remove or disassemble the driveshaft

Driveshaft Configuration:
Bushing Stiffness:
Quantity:
Add To Cart
WHAT IT DOES

The stock center support bearing carriers hold the driveshaft in place with rubber so thin about 20 lbs of force moves them from center to the end of their travel. While that’s great for making sure no NVH makes it to the cabin, it doesn’t keep the bearing centered well under load, allows the bearing to sag over time and ruin driveshaft alignment, and creates slop in the driveline during shifts and throttle application.

Over time the OEM bushing becomes brittle, eventually dry rotting and cracking. Even on the best-kept cars, the stock bushing can start to form cracks in as little as 5-10 years.

When the bushing wears and sags, it changes the alignment of the driveshaft, putting more stress on the joints. During rapid loading of the driveshaft (launches, shifts, and quick application of the throttle), the bearing is allowed to travel off-center, introducing slack in the driveline, which results in laggy and unpredictable driveline response.

Our upgraded driveshaft carriers keep the driveshaft firmly in place at all times. The more solid bushings ensure the bearing cannot move from center, maintaining torque delivery and driveshaft alignment at all times, resulting in more direct driveline response under all conditions.

Benefits as described by our customers include:

  • More direct throttle response

  • Firmer, more direct shifts

  • More instantaneous launches

  • Reduction in vibration due to driveshaft misalignment and/or rubber deterioration

  • Smoother low-speed on/off throttle behavior (1st gear in parking lots)

VIDEOS

The videos below show how OEM driveshaft carriers react to driveshaft loads and the improvement with our carriers.

INSTALLATION

Installation doesn’t require removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required.

 
 

The exact steps to access the carrier will vary slightly by model, but the removal and installation of the new carrier are the same. The basic steps are:

  • Remove any braces or splash shields preventing exhaust and heat shield removal

  • Remove or lower exhaust in area of center support bearing if needed for access

  • Remove heat shielding covering center support bearing

  • Cut off OEM carrier and remove rubber support material with razorblade, leaving base layer of molded-on

    rubber intact on the bearing

  • Clamp new carrier around OEM bearing

FITMENT
  • Mitsubishi 3000GT/GTO (AWD Only) (1991-1999)

  • Dodge Stealth (AWD Only) (1992-1996)

Does not fit driveshafts with alternate bearings/carriers. Only fits OEM bearing/carriers.

STREET vs TRACK

Street and Track refer to the durometer (stiffness) of the bushings. Track are roughly twice the durometer of the street bushings. Both track and street are many times stiffer than stock and will hold up to whatever abuse are thrown at them, but the street bushings are better at soaking up drivetrain noise and vibration. Usually both street and track are completely silent and vibration-free, but in cases where there is an underlying drivetrain issue causing the driveshaft to vibrate badly, the track bushings may not be able to soak it all up, where the street bushings can.

We generally recommend street bushings for any car that's not purpose-built for track or overland use, since the street bushings have a much lower chance of transmitting drivetrain NVH to the cabin at high speeds or under heavy throttle loads.

If you’re not sure which to go with, the “Give me Both!” option will give you a full set of each of the street and track bushings. You can use all street, all track, or even mix and match them to find the perfect balance of performance and NVH-absorption.

PARTS
 

Full Assemblies

Front Carrier Only - Street - DSM05A0-S Front Carrier Only - Track - DSM05A0-T Front Carrier Only - Street and Track - DSM05A0-B

Front and Rear Carriers - Street - DSM05A3-S
Front and Rear Carriers - Track - DSM05A3-T
Front and Rear Carriers - Street and Track - DSM05A3-B

Spare Bushing Sets

Front or Rear Carrier Only - Street - BSH02A0
Front or Rear Carrier Only - Track - BSH02A1

Front and Rear Carriers - Street - BSH02A0 x 2
Front and Rear Carriers - Track - BSH02A1 x 2

Spare Hardware Sets

Front Carrier Only - SHS07A1 Rear Carrier Only - SHS07A3

Front and Rear Carriers - SHS07A1 & A3

Driveshaft Carrier Spare Bushings Sets
from $29.99
Mitsubishi Evo 7/8/9 Driveshaft Center Support Bearing Carrier Upgrade (DSM01/2A0)
from $279.99
Mitsubishi Evo X/Lancer Ralliart/Lancer SE Driveshaft Center Support Bearing Carrier Upgrade (DSM03/4A0)
from $279.99
1g DSM Mitsubishi Eclipse/Eagle Talon, 6g Galant VR-4 Driveshaft Center Support Bearing Carrier Upgrade (DSM05A0/1)
from $279.99
Driveshaft Carrier Spare Hardware Sets
from $29.99